S.A. Meier Company
Opening Force Test Systems

ltcm100

Opening Force Test System SAM 1B
The opening force tester consists of an upper and lower fixture, motorized test stand with up to 18" of travel, a 1000 gram capacity digital gauge (other capacities on request), an opening force fixture set, and an interconnection cable from the test stand to the gauge.



The following are the features and specifications:

  • LTCM-100 test frame
  • DFE Series II gauge
  • Selectable high speed return
  • Adjustable test speed .2 in/min to 20 in/min
  • Lockable cover for speed control (optional)
  • Up to 15" maximum travel with adjustable high and low limit travel switches
  • Compression and tension force limit stops (stop at a set force)
  • Test reading storage memory
  • RS232, MITUTOYO, and analog communication output
  • Opening force fixture includes 12" bottom angle and a 2" upper angle
  • Gauge to test stand interface cable
  • Optional Cycle Control

esm
OFT-MT1

 


dvd
OFT-MT1DVD

OFT-MT1 Opening Force Tester
The Opening Force Tester from S. A. Meier Co. is a combination of flexible off the shelf force or material tester and our own fixture design. The fixture is a modular design with a standard base plate that will accept our standard 12" wide fixture or our DVD sleeve opening force fixture. With the run to distance option, the tester will open the box a programmed distance, regardless of box dimensions, and then return to start. The upper fixture is a unique design that can be used with either of the two lower fixtures.

Although the Opening Force fixture is can be mounted on most testers, the Mark-10 gauges offer the great mix of performance, security and price.

The following are the features and specifications of the Standard Opening Force Tester (OFT-MT1):

  • Standard mounting base with Opening Force fixture
  • Mark-10 ESM 301 standard frame for closed cartons to 11"
    • Optional extended travel for closes cartons to 17"
    • Other column extensions are available
    • Overload protection
  • Speed range 0.5 to 13" per minute
    • Extended speed range is available
  • Adjustable upper and lower limits
    • Optional open to a distance
  • Automatic return
    • Return on force drop option
  • Mark-10 M5 series gauge
    • Real time and peak readings displayed at same time
    • 1000 reading memory
  • User assigned password for test stand and gauge controls
  • RS-232 output
  • Optional software wedge, cables, and RS-232 to usb adapter

Click HERE to view a video o this product in action!

The following are the features and specifications of the DVD Sleeve Opening Force Tester (OFT-MT1DVD):

  • Standard mounting base with DVD Sleeve Opening Force Fixture
  • Mark-10 ESM 301 frame handle all DVD Sleeves
  • Speed range 0.5 to 13" per minute
    • Extended speed range is available
  • Adjustable upper and lower limits
  • Automatic return
  • Mark-10 M5 series gauge
    • Adjustable gauge overload protection
    • Real time and peak readings displayed at same time
    • 1000 reading memory
  • User assigned password for test stand and gauge controls
  • RS-232 output
  • Optional software wedge, cables, and RS-232 to usb adapter

Click HERE to view a video o this product in action!

ls1
Opening Force Test Fixture
Shown on Lloyd LS1
The following are the features and specifications:

Our Opening Force Fixture can be attached to virtually any force tester, shown here is the recently introduced Lloyd LS1 Material Tester.

 

Click HERE for Opening Force PDFpdf

S.A. Meier Company of Milwaukee, Inc.

 

 

 

 

Quality Sales and Service Since 1932